← Latest stories

SYZMIK X7C+ uses a Carbon-printed EPU 45 lattice in an approximately 10 mm headband pad

SYZMIK Sports has adopted an elastomer lattice pad made with Carbon DLS and EPU 45 for its X7C+ protective flag-football headband. The design targets impact attenuation and comfort within a constrained pad thickness and has received a five-star Virginia Tech test rating.

SYZMIK X7C+ protective headband and its 3D-printed lattice pad
Image: SYZMIK Sports / Carbon(南極熊3D打印網掲載)
SOURCE 南极熊

SYZMIK Sports has integrated a lattice pad printed in Carbon EPU 45 using Digital Light Synthesis into the X7C+ protective headband for flag football and 7-on-7 play. According to an independently written report by Nanjixiong, the available cushioning space was about 10 mm, leaving the team to improve protection without making the product noticeably thicker than its EVA-foam predecessor.

The lattice can be tuned through geometry, wall thickness and density, with a softer zone next to the head and a more impact-oriented zone toward the outside in a single printed part. Carbon describes EPU 45 as a strain-rate-sensitive elastomer intended for energy absorption. The companies also cite the ability to revise the internal structure without remaking tooling as a development advantage.

The X7C+ received a five-star rating in Virginia Tech Helmet Lab testing for flag-football headgear. That rating is derived from 36 laboratory impacts measuring linear and rotational acceleration and applying an injury-risk model; it does not directly state how many injuries the headband will prevent in play. The report does not disclose production volume, yield or unit-cost comparisons, so manufacturing scale and economics remain company claims rather than independently verified results.

Key facts

  • The product is SYZMIK Sports' X7C+ protective headband.
  • Its cushioning pad is a 3D-printed EPU 45 lattice made with Carbon DLS.
  • The report describes approximately 10 mm of available pad thickness.
  • It received a five-star Virginia Tech Helmet Lab rating based on 36 laboratory impacts.
  • Production volume, yield and unit-cost comparisons were not disclosed.

Context

The project shows how zonally tuned lattices can replace foam in protective equipment without changing the external envelope, while real-world injury reduction and production economics still require separate evidence.

Suggest a correction

头部防护的创新品牌SYZMIK携手Carbon 3D打印晶格打造X7C+运动头带

Visit source
Find a story

Find the brands and technologies you follow.