Raise3D Unveils T450 and T700 After $15M Funding Round
Raise3D has announced the completion of a $15 million C2+ funding round and introduced the T450 and T700 large-format FFF printers, priced in the US at $4,999 and $15,999.

Raise3D officially announced on November 10, 2026 that it had completed a $15 million C2+ funding round and introduced the T450 and T700 large-format FFF printers. US prices are $4,999 and $15,999 respectively. The company says the funding will support large-format FFF, SLS, DLP, software integration, application development and market expansion.
The T450 has a 450 × 350 × 400 mm build volume and a chamber rated to 70°C. The T700 provides 700 × 500 × 1,000 mm and a 60°C chamber. Both use a four-motor CoreXY system and TwinFlow, which merges two filament paths into one nozzle, with nozzle temperatures up to 420°C and a 120°C build plate.
The quoted 600 mm/s speed and the T450's 80 mm³/s maximum flow are manufacturer figures under specified test conditions. AI-assisted monitoring may vary by model, configuration and firmware, while the announcement provides no independent performance testing or shipment date.
Key facts
- $15 million C2+ funding round completed
- T450: 450 × 350 × 400 mm, $4,999 US price
- T700: 700 × 500 × 1,000 mm, $15,999 US price
- Both use 4MD CoreXY and a TwinFlow single-nozzle system
Context
The launch pushes large-format FFF toward lower price points while targeting tooling and low-volume production with engineering materials and high-flow extrusion.


