Raise3D launches T450 and one-meter-tall T700 FDM systems
Raise3D has launched the T450 and T700. The T700 offers 700 × 500 × 1,000 mm, while the T450 provides 450 × 350 × 400 mm; both use TwinFlow extrusion and heated chambers.

Raise3D has launched the T450 and T700 large-format FDM systems. Build volumes are 450 × 350 × 400 mm and 700 × 500 × 1,000 mm respectively. Both use a 4MD CoreXY architecture with four frame-mounted motors and TwinFlow extrusion, which feeds two material paths into one nozzle.
Maximum figures are stated as 600 mm/s and 80 mm³/s. The flow figure was measured with Hyper Speed ABS V2 at 250°C, a 0.4 mm nozzle and a single-wall smooth structure. Chamber limits are 70°C for the T450 and 60°C for the T700, with a 420°C nozzle and 120°C build plate.
The T450 is priced at $4,999/€4,999 and the T700 at $15,999/€15,999. Deliveries are scheduled to begin by the end of December 2026 and January 2027 respectively.
Key facts
- T450: 450 × 350 × 400 mm
- T700: 700 × 500 × 1,000 mm
- Maximum speed: 600 mm/s (stated)
- Maximum flow: 80 mm³/s under reference conditions
- Prices: $4,999 / $15,999
Context
The one-meter Z height of the T700 targets large tooling and patterns, while the T450 brings the same platform to a smaller footprint.


