Snowbird Produces Seven Parts During RIMPAC 2026
Snowbird Technologies used its deployable SAMM Tech hybrid manufacturing system aboard USS Essex and at a shore site in Hawaii to make seven part types. Four were below conventional procurement costs in the company’s comparison.

TCT Magazine reports that Snowbird Technologies deployed its SAMM Tech hybrid manufacturing system aboard USS Essex and at Schofield Barracks during RIMPAC 2026. Using a Meltio Engine Blue and nitrogen from an on-site generator, the team produced seven part types, including oxygen-tank brackets, drain caps, load-test clamp components, turnbuckles, a four-inch pipe flange and an air-pressure-radio six-pack.
Snowbird reported that 12 oxygen-tank brackets took an estimated 75 hours and cost $2,492, versus quoted procurement costs of $9,624 to $10,224. It listed the load-test clamp outer at three hours and $101, the inner at nine hours and $289, and the radio six-pack at five hours and $154. Only four of the seven part types showed a cost advantage.
These figures are Snowbird’s post-exercise comparison, not an independent cost audit or evidence of long-term part durability. The deployment nevertheless gives a concrete example of how point-of-need manufacturing can be assessed across production, procurement lead time, machining and inspection.
Key facts
- SAMM Tech was deployed aboard USS Essex and at Schofield Barracks
- The system used a Meltio Engine Blue and locally generated nitrogen
- Four of seven part types showed a cost advantage in Snowbird’s comparison
- Twelve oxygen-tank brackets were estimated at 75 hours and $2,492
Context
The exercise adds operating data for comparing expeditionary metal-part production with conventional procurement on both cost and lead time.


