← Latest stories

Yangwang U9X Uses 3D-Printed Body Parts in 503.17 km/h Run

BYD’s Yangwang U9 Xtreme reached 503.17 km/h in Abu Dhabi, a speed recognized by the FIA. Its body incorporates integrated high-strength aluminum parts made on BLT large-format metal AM systems.

Yangwang U9 Xtreme during its high-speed run
Image: BYD / 南極熊
SOURCE 南极熊

On November 1, 2026, the Yangwang U9 Xtreme reached 503.17 km/h during a closed-road high-speed run in Abu Dhabi. The FIA recognized the speed, and the car secured Guinness records for the fastest production car and fastest electric production car in a single-direction run. BYD rates the four-motor system at 3,019 PS.

According to Nanjixiong and BLT, integrated high-strength aluminum body parts were produced on BLT-S1000, S615 and S815 systems. BLT claims over 200% higher torsional stiffness than a solid structure of equal mass, more than 30% weight reduction against a conventional proposal, and ±0.5 mm deviation across over 90% of the printed blank. These are manufacturer figures, and the speed run cannot isolate the contribution of the AM parts.

Key facts

  • The FIA-recognized speed was 503.17 km/h
  • Body parts were printed on BLT-S1000, S615 and S815 systems
  • Stiffness, weight and dimensional figures are BLT claims

Context

The project applies large-format metal AM to load-bearing structures in an ultra-low-volume performance car, but a 30-car run cannot establish mass-production cost or durability.

Suggest a correction

时速503公里,仰望U9X再破极速纪录,采用一体化3D打印车身

Visit source
Find a story

Find the brands and technologies you follow.