Lynxel reveals two LMS resin printers, claiming support up to 300,000 cP
Lynxel has unveiled the LynBeam LB1 and full-color LynChrom LC1 resin printers using its LMS process. The 300,000 cP ceiling is a company claim; test conditions, pricing and delivery dates remain undisclosed.

Resin 3D printing startup Lynxel has revealed the LynBeam LB1 and LynChrom LC1, both built around its Layered Membrane Stereolithography (LMS) process. A moving membrane actively delivers resin before exposure by a 600 dpi linear laser. Lynxel lists 50,000 cP as the standard capability and up to 300,000 cP as a maximum, but has not published the test conditions or LC1-specific material combinations.
The LB1 offers a 200 × 400 × 300 mm build volume at a 50 μm layer setting. The LC1 has a 200 × 300 × 300 mm color build area and applies water-based CMYK dye ink to the resin during printing at 1200 dpi. Cleaning and post-curing are still required, although the integrated color step could reduce separate painting for suitable prototypes.
Material is supplied in 900 g cartridges with identification chips. Both systems are due to appear at Formnext 2026, but final prices, supported material sets and delivery dates have not been announced; the products remain at the pre-launch Kickstarter stage.
Key facts
- LB1 build volume: 200 × 400 × 300 mm
- LC1 color build area: 200 × 300 × 300 mm
- Layer setting: 50 μm
- Resin viscosity: 50,000 cP standard; up to 300,000 cP (company claim)
- LC1 color system: 1200 dpi CMYK water-based dye ink
Context
Combining high-viscosity materials with in-build coloring could broaden options for small prototyping teams, but material-specific validation and finalized shipping specifications are still needed.


