← Latest stories

AXILOOP Introduces MC8 Desktop 3D Printer With Eight Toolheads

AXILOOP has introduced the MC8 and MC8 Pro with eight independent toolheads and a 300 × 300 × 300 mm build volume. The four-second swap and speed figures are manufacturer ratings, with Kickstarter shipping planned for Q1 2027.

AXILOOP MC8 loaded with eight filaments beside a multicolor print
Image: AXILOOP / 3D Printing Industry

AXILOOP has introduced the MC8 and enclosed MC8 Pro desktop FFF printers, each built around eight independent toolheads. The 300 × 300 × 300 mm platform can prepare different colors, materials or nozzle configurations for one job. Manufacturer ratings include an approximately four-second preheated tool swap, 300 mm/s maximum print speed, 600 mm/s travel speed, 25,000 mm/s² acceleration and a 320°C nozzle. These are not results from a controlled comparison with competing systems.

The MC8 Pro adds chamber heating to 65°C and internal air circulation for materials including ABS, ASA, PA, PC and fiber-reinforced polymers. The standard model weighs 36 kg and the Pro 40 kg. Kickstarter pricing starts at $1,099, with shipping targeted for Q1 2027, but production-unit reliability, long-term eight-head alignment and real-world purge waste have not been independently validated.

Key facts

  • Eight independent toolheads and a 300 × 300 × 300 mm build volume
  • Rated at about four seconds per preheated swap and up to 300 mm/s printing
  • Kickstarter pricing starts at $1,099, with Q1 2027 shipping targeted

Context

Putting eight heads in a desktop system could reduce purging across color, material and nozzle changes, but practical value will depend on production-unit alignment and endurance data.

Suggest a correction

AXILOOP’s New MC8 Desktop 3D Printer Built Around Eight Independent Toolheads

Visit source
Find a story

Find the brands and technologies you follow.