← Latest stories

ATLIX details xBUILD 5000 and robotic cylinder-exchange concept

ATLIX will show the xBUILD 5000 with a 500 × 500 × 400 mm build volume and four 1 kW lasers, alongside a robotic cylinder-exchange concept for the xBUILD 3000.

ATLIX xBUILD 5000 metal 3D printer displayed at Formnext
Image: ATLIX / 3D Printing Industry

ATLIX will present its xBUILD 5000 metal LPBF system and a robotic cylinder-exchange concept for the xBUILD 3000, developed with DHR Engineering, at Formnext 2026. The xBUILD 5000 has a 500 × 500 × 400 mm build volume covered by four 1 kW lasers.

ATLIX says multilaser alignment is checked every two layers with a stated 40 μm accuracy. Parallel unloading and loading of build modules is intended to limit downtime between jobs to about 15 minutes, while double-sided recoating is claimed to cut non-productive recoating time by up to 50%. These are manufacturer specifications.

The robotic exchange setup is a concept demonstration, not evidence of a fully automated commercial production cell. Listed materials include stainless and tool steels, aluminum, nickel-based alloys and titanium alloys.

Key facts

  • Build volume: 500 × 500 × 400 mm
  • Lasers: four 1 kW units
  • Alignment check: every two layers; stated 40 μm
  • Between-job downtime: about 15 minutes (company claim)
  • Robotic exchange: concept demonstration

Context

The proposal targets productivity beyond exposure speed by addressing module handling and preparation between builds.

Suggest a correction

ATLIX to Showcase xBUILD 5000 and Robotic Automation at Formnext 2026

Visit source
Find a story

Find the brands and technologies you follow.