← Latest stories

WASP updates ceramic, pellet and robotic extrusion systems

At Formnext 2026, WASP is showing a higher-output CFS, a large-format printer with 120°C localized heating, and a compact robotic extruder rated above 3 kg/h.

WASP LDM 450 extruding material
Image: WASP via 3D Printing Industry

WASP is presenting updated extrusion systems for ceramic, pellet and robotic 3D printing at Formnext 2026. The ceramic CFS LDM 450/11 uses a redesigned single motor and internal screw; WASP says its maximum material output is twice that of the previous version. Absolute throughput, supported viscosity and maximum particle size were not disclosed.

The CUBO HDP Industrial retains a 1,200 × 1,200 × 1,200 mm build volume while adding a localized chamber that heats the area around the part to 120°C and a vacuum build plate. WASP lists recycled PETG, PP and PLA as well as fiber-reinforced ABS, ASA and PC among the target materials.

The compact HDP TORNADO robotic extruder is rated above 100 Nm and 3 kg/h and is intended for collaborative robots with payloads below 5 kg. These figures are WASP specifications; pricing and independent test results were not provided.

Key facts

  • CFS output claimed at twice the previous maximum
  • CUBO HDP Industrial has a 1,200 mm cubic build volume
  • Localized heating up to 120°C
  • HDP TORNADO rated above 3 kg/h and 100 Nm

Context

The updates broaden one supplier’s extrusion range across pastes, engineering polymers and lightweight cobots, with production throughput as the common focus.

Suggest a correction

WASP brings upgraded ceramic, pellet and robotic 3D printing tech to Formnext 2026

Visit source
Find a story

Find the brands and technologies you follow.