Revopoint launches standalone MIRACO 2 3D scanner
The standalone scanner combines six capture modes with the Revo Agents workflow, aiming to shorten the path from field capture to CAD and inspection.

Revopoint introduced the MIRACO 2 standalone 3D scanner on Kickstarter on November 18. The 960 g unit carries an eight-core CPU, six-core NPU and 6-inch 2K AMOLED display. It can also connect to a PC over Wi‑Fi 6 or USB‑C 3.0; Revopoint says multi-line laser scanning reaches up to 120 fps in wired mode with a dedicated GPU.
The scanner provides six modes: 34-line crossed blue laser, 15-line parallel laser, single-line deep-hole, full-field HD, rapid VCSEL and hybrid HD. Manufacturer specifications list up to 0.02 mm single-frame accuracy in multi-line laser mode and up to 10 million points per second in hybrid HD. The recommended minimum subject size is 10 × 10 × 10 mm, while an optional photogrammetry kit extends coverage to 5 × 5 × 5 m.
Revopoint is also promoting Revo Agents, a natural-language system intended to assist scan-to-CAD conversion and tolerance analysis. The accuracy and automation gains are manufacturer claims; no independent performance validation was presented.
Key facts
- 960 g with a 6-inch 2K AMOLED display
- Six scanning modes; claimed accuracy up to 0.02 mm
- 16 GB/256 GB or 32 GB/512 GB
- 10,000 mAh battery, claimed runtime about three hours
Context
The product consolidates capture, processing and CAD assistance in a portable unit, targeting less manual work after field scanning.


